This circuit was posted to the files section of the Yahoo group Joulethief (you may need to join to see this). I´m going to try to attach the pic but I couldn´t do it earlier, You might also be able to see the picture here. I built four versions of this circuit and made some
(Read More…)
One of the earliest germanium transistors was the 2N404. It became a popular transistor for use in projects after the demand for germanium transistors fell when Texas Instruments and other companies started selling silicon transistors (for more transistor history see here). I recently bought some germanium transistors labeled 2N404, but they seem to have much
(Read More…)
I had these pics of my JTs from 2009, both conventional and supercharged JTs. The conventional JT is lucky if it can be 50 percent efficient. My Supercharged JT will do upwards of 80 percent easily, using much less battery current while giving the same amount of light output. I believe I have seen only
(Read More…)
I was reading a post from a school teacher about wanting a subject for the class project. Bingo, I thought of something that had not really come up before: “How much does it cost to make a Joule Thief?” I guess it would be best to start with a BOM, or Bill of Materials. The
(Read More…)
Another pic from the past – Apr 2009. The 10 Farad supercapacitor powers the flasher brightly for 1 hour and dims for another 3 hours. The circuit consists of an astable multivibrator with unequal resistors to make it put out a short pulse every second or so. This is the three transistors to the left
(Read More…)
The 2N2222 and 2N2222A comes in, and has always come in a metal can package. The manufacturers came out with an equivalent that was much cheaper because it does not have the metal package, it’s a regular TO-92 epoxy package. The 2N2222 and 2N2222A specifications require a metal can package, so the manufacturers named the
(Read More…)
It will work with a few hundred millivolts.DAMASCHKE-064a-97ia-jmd
This piece of oak serves as a quick way to swap parts for a Joule Thief. I have an air core coil connected to it, and a 3mm white LED which is tired from being used for a few hundred hours. The plus and minus wires are each wrapped around a steel screw and the
(Read More…)
I have assembled several of my LED Fader circuits, and since I had so many orange and yellow LEDs, I decided to use those instead of the original red LEDs (each board takes 6 LEDs). The circuit uses one transistor and three RC sections to make a PSO (phase shift oscillator), and another transistor to
(Read More…)
The lifetime of white LEDs is touted by manufacturers and sellers as 100 thousand hours. From my own tests, I’ve found that to be far, far from the truth. I’ve purchased white LEDs on eBay from manufacturers in China and Hong Kong, and set them up on a power supply to test their lifetimes. I
(Read More…)
